Accessory Storage Case; General Assembly Instructions - Cuisinart SFP-13 Instruction And Recipe Booklet

ACCESSORY
STORAGE CASE
Operating the Lock
To unlock, turn counterclockwise. Gently lift up
the transparent cover. Do not force the cover open
when the knob is in the locked position. To lock,
gently close the cover and turn the knob clockwise.
Inserting Accessories
The Accessory Storage Case holds the small
chopping/mixing blade (A) on the peg in the back
of the case; the dough blade (B) on the middle
peg; the stem adapter (C) on the front peg;
the large chopping/mixing blade (D) in the front
cavity; the adjustable slicing disc (E) in the slot
on the right, and the reversible shredding disc (F)
in the left slot.
Carefully hold discs by center hub when inserting
into and removing from the storage case.
NOTE: DO NOT TOUCH METAL BLADES
OR CUTTING EDGES OF DISCS. ALL ARE
EXTREMELY SHARP AND CONTACT COULD
CAUSE INJURY.
F
C
D
GENERAL ASSEMBLY
INSTRUCTIONS
Before First Use
Before using your Cuisinart
13-Cup Food Processor for the first time, wash
all the parts (see Cleaning, Storage and
Maintenance Instructions on page 12).
Place the food processor base on a dry,
1.
level countertop with the controls facing
toward you. Do not plug the unit in until it
is fully assembled.
With the large bowl on the base, use
2.
the handle to turn the work bowl
counterclockwise to lock it onto the
housing base.
3. To use the small work bowl, first attach the
large work bowl to the base. Place the
stem adapter onto the shaft, then lower
the small work bowl over the adapter and
into the large bowl. Place your fingers in the
recesses of the small bowl and turn slightly
clockwise to properly position it in the large
bowl.
Large Bowl
& accessories
A
B
E
8
Stainless Steel
®
Small Bowl
& accessories