Table of Contents
Advertisement
programme ends when the appliance is
at the set core temperature.
1. Activate the appliance.
2. Touch
3. Install the core temperature sensor.
Refer to "Core temperature sensor".
4. Touch
programme for the core temperature
sensor.
The display shows the cooking time,
and
.
9. USING THE ACCESSORIES
WARNING!
Refer to Safety chapters.
9.1 Core temperature sensor
There are two temperatures to be set:
the oven temperature and the core
temperature.
The core temperature sensor measures
the core temperature of the meat. When
the meat is at the set temperature, the
appliance deactivates.
CAUTION!
Only use the core
temperature sensor supplied
or the correct replacement
parts.
The core temperature
sensor must stay in the meat
and in the socket during the
cooking.
1. Activate the appliance.
2. Put the point of the core temperature
sensor (with
the centre of the meat.
3. Put the plug of the core temperature
sensor into the socket at the front of
the appliance.
.
or
to set the
on the handle) into
5. Touch
or the settings save
automatically after five seconds.
When the set time ends, an acoustic
signal sounds for two minutes.
flashes.
6. Touch a sensor field or open the door
to stop the acoustic signal.
7. Deactivate the appliance.
The display shows
default set core temperature. The
temperature is 60 °C for the first
operation, and the last set value for each
subsequent operation.
When you put the core
temperature sensor into the
socket, you cancel the
settings for the clock
functions.
4. Touch
or
temperature.
5. Touch
or the settings save
automatically after 5 seconds.
You can set the core
temperature only when
flashes. If
the display but does not
flash before you set the
core temperature, touch
and
or
new value.
ENGLISH
15
flashing and the
to set the core
is in
to set a
Advertisement
Table of Contents
