S-Meter; Nb-Anl/Anl/Off; Noise Limiter Switch) - Cobra 29 LTD Classic User Manual

Operation
Selecting A Selecting A Channel
Channel
1 Switch to NORMAL to select desired channel.

S-Meter

S-Meter
Swings proportionately to strength of incoming
signal when receiving.
The S/RF-SWR-CAL switch must be in the
1
S/RF position to read the meter.
14
NB-ANL/ANL/OFF (Noise Blanker/Automatic
Noise Limiter) Switch
1 When switched to ANL the Automatic Noise
Limiter is activated. This helps reduce noise
created by the vehicle's electronics.
When switched to NB/ANL position the RF
Noise Blanker is also activated, providing
increased noise filtration.
When switched to OFF position all noise
filtration will be turned off.
15
Operation
NB-ANL/ANL/
OFF (Noise
Blanker/
Automatic
Noise Limiter)
Switch
Note
The RF noise blanker is very
effective in reducing repetitive
noises such as ignition
interference.