Selecting A Channel; S-Meter; Nb-Anl/Anl/Off (Noise Blanker/Automatic Noise Limiter Switch) - Cobra 29 LTD CLASSIC Owner's Manual

Operation
Selecting A

Selecting A Channel

Channel
Switch to
1
Select
2

S-Meter

S-Meter
Swings proportionately to the strength of an
incoming signal when receiving.
The
1
S/RF position to read the meter.
14
CH19
NOR
NORMAL to select a desired channel.
one of forty channels.
S/RF-SWR-CAL switch must be in the
NB-ANL/ANL/OFF (Noise Blanker/Automatic
Noise Limiter) Switch
When switched to ANL the Automatic Noise
1
Limiter is activated. This helps reduce noise
created by the vehicle's electronics.
When switched to NB/ANL position the RF
Noise Blanker is also activated, providing
increased noise filtration.
When switched to OFF position all noise
filtration will be turned off.
CH19
NOR
Operation
NB-ANL/ANL/OFF
(Noise Blanker /
Automatic Noise
Limiter) Switch
Note
The RF noise blanker is very
effective in reducing repetitive
noises such as ignition
interference.
15