Operation
Selecting A
Selecting A Channel
Channel
1
S-Meter
S-Meter
Swings proportionately to strength of incoming
signal when receiving.
1
14
All manuals and user guides at all-guides.com
Switch to
NOR to select desired channel.
The
S/FR-SWR-CAL switch must be in the
S/RF position to read the meter.
NB-ANL/ANL/OFF (Noise
Blanker/Automatic Noise Limiter) Switch
1
When switched to ANL the Automatic Noise
Limiter is activated. This helps reduce noise
created by the vehicle's electronics.
When switched to NB/ANL position the RF
Noise Blanker is also activated, providing
increased noise filtration.
When switched to OFF position all noise
filtration will be turned off.
Operation
NB-ANL/ANL/
OFF (Noise
Blanker/
Automatic
Noise Limiter)
Switch
Note
The RF noise blanker is very
effective in reducing repetitive
noises such as ignition
interference.
15