Table of Contents
Advertisement
BEFORE FIRST USE
WARNING!
Refer to Safety chapters.
Initial Cleaning
Remove all accessories from the appliance.
Refer to "Care and cleaning" chapter.
Clean the appliance before first use.
Put the accessories back to their initial
position.
Setting the time
You must set the time of day before you
operate the oven.
When you connect the appliance to the
electrical supply or after a power cut, the
display shows 0:00.
1. Press at the same time the
buttons.
Hold the buttons until 0:00 flashes on the
display.
2. Press the
or
of day.
After approximately five seconds, the
flashing stops and the display shows the
time you set.
Preheating
Preheat the empty appliance to burn off the
remaining grease.
1. Set the maximum temperature.
2. Let the appliance operate for
approximately 1 hour.
WARNING!
Accessories can become hotter than
usual.
10
and
button to set the time
The appliance can emit an odour and
smoke. This is normal. Make sure that the
airflow is sufficient.
Let the oven cool down. Dampen a soft
cloth with warm water and a little mild
washing-up liquid and use this to clean the
oven cavity.
Advertisement
Table of Contents
