Table of Contents
Advertisement
INSTALLATION
2. Carefully remove from the burner the
thermocouple A. Next remove the spark
plug B.
3. Unscrew the screw and slowly pull out
the burner.
1
4. Release the burner injector with a 7 mm
socket spanner and replace it with a
right one.
34
A
B
2
Assemble the burner in a revers sequence.
Replace the gas type sticker near the gas
supply ramp with the one related to the new
gas type.
Adjusting the minimum gas
level on the oven burner
1. Disconnect the appliance from the
electricity.
2. Remove the knob for the oven
functions. If there is no access to the
bypass screw dismount the control
panel before adjustment start.
3. With a thin and flat screwdriver adjust
the bypass screw A.
The model determines the position of
the bypass screw A.
A
Advertisement
Table of Contents
