Back Panel - TP-Link Archer VR400 User Manual

Chapter 1
1 2 2

Back Panel

The back panel provides buttons, connection ports, and antennas. Refer to the following
for detailed instructions.
Item
DSL Port
USB
USB Port
WPS Button
Wi-Fi Button
Reset Button
LAN1, LAN2, LAN3,
and LAN4/WAN
Ports
Power On/Off Button
Power Port
Antennas
For connecting the modem router to the Internet. Connect the port to the
splitter or directly connect the port to the phone jack via a phone cable. For
details, please refer to Connect Your Modem
On USB device is identified.
Flashing USB device identification is in progress.
Off USB device is unplugged or identification failed.
For connecting to USB storage devices or USB
Press to start a WPS synchronization.
Press to turn 2.4GHz and 5GHz Wi-Fi on or off.
Press and hold for at least 8 seconds until all LEDs turn on momentarily to
reset the modem router to factory default settings
For connecting to your PCs or other Ethernet network devices.
In wireless router mode, the LAN4/WAN port is used for connecting to a
Cable/FTTH/VDSL/ADSL device.
Press to power on or off the modem router.
For connecting the modem router to power socket via the provided power
adapter.
Used for wireless operation and data transmission. For the best Wi-Fi
performance, we recommends that the outside two antennas be outward at
about 30 degrees.
Get to Know About Your Modem Router
Description
Router.
printers.
.
5