TP-Link Archer VR400 User Manual page 32

Chapter 7
I want to:
How can I
do that?
Done!
Configure the modem router to enable Internet Protocol
Television (IPTV) Services.
For example, I already bought IPTV service, but this service can
only be delivered through the Internet. Therefore, I need to
configure my modem router first.
1 Visit http://tplinkmodem.net, and log in with the password
you set for the router.
2 Go to
Advanced >
3 Click Enable IPTV
4 Select your DSL modulation type.
5 Specify a LAN port for IPTV connection and connect the set-
top box to this port.
6 If you select
VDSL
and set the VLAN
(VPI and VCI). VLAN ID and PVC parameters are all provided
by your IPTV service provider.
7 Click
Save to make the settings effective.
Configurations needed on modem router is done now! You may
need other configurations on your set-top box before enjoying
your TV.
IPTV to open the configuration page.
to enable this function.
modulation type, check to enable VLAN
ID. If you select ADSL, fill in PVC parameters
IPTV
28