TP-Link ARCHER C1200 User Manual page 74

Chapter 12
Done!
2 ) Click Save.
3 ) After configuring IGMP proxy, IPTV can work behind your
router now. You can connect your set-top box to any of
the router's Ethernet port.
If IGMP is not the technology your ISP applies to provide
IPTV service:
1 ) Tick Enable IPTV.
2 ) Select the appropriate
• Select Bridge
parameters are required, and then skip to Step 4.
• Select Custom
necessary parameters.
3 ) After you have selected a mode, the necessary parameters
are predetermined. You can perform other configuration,
e.g. enter the
Multicast VLAN Priority
ISP.
4 ) For Russia, Singapore-ExStream, Malaysia-Unifi and
Malaysia-Maxis mode, connect the set-top box to the
predetermined LAN port. For Bridge and Custom mode,
select the LAN
corresponding port.
5 ) Click Save.
Your IPTV setup is done now! You may need to configure your
set-top box before enjoying your TV.
Tips
Qos and IPTV cannot be enabled at the same time.
Customize Your Network Settings
Mode according to your ISP.
if your ISP is not listed and no other
if your ISP is not listed but provides
IPTV Multicast VLAN ID
in Russia mode according to your
type and connect the set-top box to the
and select the IPTV
70