TP-Link ARCHER C1200 User Manual page 20

Chapter 4
5. Click Save. To check your Internet connection, click
page.
Note:
It may take 1-2 minutes to make the settings valid.
6. After the connection succeeds, the screen will display as follows. Here we take
PPPoE as an example.
Tips:
1. If your Internet connection type is
2. If you use Dynamic IP and
page, please go to Advanced
3. If you still cannot access the Internet, refer to the
BigPond Cable, please go to
PPPoE and you are provided with any other parameters that are not required on the
> Network > Internet to complete the configuration.
FAQ for further instructions.
Set Up Internet Connection
Network Map on the left of the
Advanced > Network > Internet to set your router.
16