Customize Your Settings - TP-Link ARCHER C1200 User Manual

Chapter 6
6. 1. 2.

Customize Your Settings

¾ To Only Share Specific Content
By default, Share All is enabled so all contents on the USB disk is shared. If you want to
only share specific folders, follow the steps below:
1. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2. Select Basic > USB Settings
Click the button to disable
3. Select the Volume Name
4. Decide the way you share the folder:
• Allow Guest Network Access:
can access the folder.
• Enable Authentication:
username and password to access the folder. Refer to
for Data Security
• Enable Write Access:
folder.
• Enable Media Sharing:
music and watch movies in the folder directly with DLNA-supported devices.
Click Media Sharing
5. Click OK.
> Sharing Access. Focus on the
Share All, and click
and Folder Path, and then enter a
If you tick this check box, guest network users
If you tick this check box, you will be required to use a
to learn more.
If you tick this check box, network clients can modify the
If you tick this check box, you can view photos, play
to learn more.
Folder Sharing
Add to add a new sharing folder.
Folder Name
To Set up Authentication
USB Application
section.
as needed.
27