TP-Link ARCHER C1200 User Manual page 100

Q4. I cannot access the Internet even though the configuration is
finished, what can I do?
1. Visit http://tplinkwifi.net.
2. Go to
Advanced
As the follow picture shows, if IP Address is a valid one, please try the methods
below and try again:
• Your computer might not recognize any DNS server addresses, please manually
configure DNS server.
1 ) Go to Advanced
2 ) Enter 8.8.8.8 as Primary DNS, click Save.
Tips: 8.8.8.8 is a safe and public DNS server operated by Google.
• Power cycle the modem and the TP-LINK router.
> Status to check Internet status:
> Network > DHCP Server.
96