Use Quick Setup Wizard; Manually Set Up Your Internet Connection - TP-Link ARCHER C1200 User Manual

Chapter 4
4. 1.

Use Quick Setup Wizard

The Quick Setup Wizard will guide you through the process to set up your router.
Tips:
If you need the IPv6 Internet connection, please refer to the section of
Follow the steps below to set up your router.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Click Quick Setup
to connect your router to the Internet.
Note:
During the quick setup process:
• If you are not sure of the
connection information.
• If you have changed the preset wireless network name (SSID) and wireless password, all your wireless devices
must use the new SSID and password to connect to the router.
4. 2.

Manually Set up Your Internet Connection

In this part, you can check your current Internet connection settings. You can also
modify the settings according to the service information provided by your ISP.
Follow the steps below to check or modify your Internet connection settings.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to Basic > Internet.
3. Select your Internet connection type from the drop-down list.
Note:
If you are unsure of your connection type, click
and connection information, you can also refer to the demonstrations in Step 4 to determine your connection type.
4. Follow the instructions on the page to continue the configuration. Parameters on
the figures are just used for demonstration.
1 ) If you choose
or not. Dynamic IP users are usually equipped with a cable TV or fiber cable.
on the top of the page. Then follow the step-by-step instructions
Internet Connection Type, please click
Auto Detect. Since different connection types require different cables
Dynamic IP, you need to select whether to clone the MAC address
Set Up Internet Connection
Set Up an IPv6 Internet Connection.
Auto Detect or contact your ISP for Internet
13