Cancelling The Programme; Machine Is In Rinse Hold Mode; End Of Programme; Your Machine Is Equipped With A "Standby Mode - Beko WMB 71543W User Manual

Table of Contents

4.6.18 Cancelling the programme

If you want to open the loading door after you have cancelled the programme but it is not

possible to open the loading door since the water level in the machine is above the loading

door opening, then turn the Programme Selection knob to Pump+Spin programme and

discharge the water in the machine.

Spin symbol flashes and Pause symbol illuminates when the machine is in Rinse Hold

mode.

If you want to spin your laundry when the machine is in this mode:

Adjust the spin speed and press Start / Pause / Cancel button. Pause symbol disappears

and Start symbol appears. Programme resumes, discharges the water and spins the

laundry.

If you only want to drain the water without spinning:

Just press Start / Pause / Cancel button. Pause symbol disappears. Start symbol appears.

Programme resumes and discharges the water only.

"End" appears on the display at the end of the programme. Symbols of the programme

steps remain lit. Auxiliary function, spin speed and temperature that were selected at the

beginning of the programme remain selected.

In case of not starting any programme or waiting without making any other operation

when the machine is turned on by On/Off button and while it is in selection step or if no

other operation is performed approximately 2 minutes after the programme you selected

has come to an end, your machine will automatically switch to energy saving mode.

Brightness of indicator lights will decrease. Also, if your product is equipped with a display

showing the programme duration, this display will completely turn off. In case of rotating

the Programme Selection knob or pressing any button, lights and display will restore to

their previous condition. Your selections made while exiting the energy saving mode may

change. Check the appropriateness of your selections before starting the programme.

Readjust if necessary. This is not a fault.

36 / EN

Press and hold Start / Pause / Cancel button for 3

seconds. Start symbol flashes. Symbol of the step at

which the programme was cancelled remains lit. „End"

appears on the display and the programme is cancelled.

Washing Machine / User's Manual

Table of Contents