Table of Contents
Advertisement
4.6.13 Starting the programme
1. Press Start / Pause / Cancel button to start the programme.
2. Start symbol showing the startup of the programme will turn on.
3. Loading door is locked and Door Locked symbol appears on the display.
4. The symbol of the step from which the programme has started appears on the display
(Prewash, Main Wash, Rinse, Softener and Spin).
4.6.14 Progress of programme
Progress of a running programme is indicated on the display with a set of symbols.
Relevant symbol appears on the display at the beginning of each programme step and all
symbols remain lit at the end of the programme. The farthermost right symbol indicates
the current programme step.
Prewash
If the Prewash auxiliary function is selected, Prewash symbol appears on the display
indicating that the prewash step has started.
Main Wash
Main Wash symbol indicating that the main wash step has started appears on the display.
Rinse
Rinse symbol indicating that the rinsing step has started appears on the display.
Softener
Softener symbol indicating that the softener step has started appears on the display.
Spin
Appears at the beginning of the final spin step and remains lit during Spin and Pump
special programmes.
C
If the machine does not pass to the spinning step, Rinse Hold function might be active or
the automatic unbalanced load detection system might be activated due to the unbalanced
distribution of the laundry in the machine.
4.6.15 Loading door lock
There is a locking system on the loading door of the machine that prevents opening of the
door in cases when the water level is unsuitable.
Door Locked symbol appears when the loading door is locked. This symbol will flash until
the loading door becomes ready to open when programme completes or the machine is
paused. Do not force to open the loading door in this step. Symbol disappears when the
door is ready to open. You can open the door when the symbol disappears.
4.6.16 Changing the selections after programme has started
Switching the machine to pause mode
F1
F2
34 / EN
Press the Start / Pause / Cancel button to switch the
machine to pause mode. Pause symbol appears on the
display indicating that the machine is paused. Start
symbol disappears.
F3
F4
Washing Machine / User's Manual
Advertisement
Table of Contents
