Reading Parameters; Decoding Parameters; Code Selection - Datalogic DLL5100 Series Quick Reference

READING PARAMETERS

trigger type = hardware, trigger signal = level, no timeout,
Flash On = 1 sec, Flash Off = .6 sec, one read per cycle,
safety time .5 sec, beeper intensity high, tone 2

DECODING PARAMETERS

ink spread enabled, overflow control enabled, interdigit
control enabled, decoding safety = one read

CODE SELECTION

enabled codes
•
EAN 8/EAN 13 / UPC A/UPC E without ADD ON
check digit transmitted, no conversions
•
Interleaved 2/5
check digit control and transmission, variable length
code; 4-99 characters
•
Standard Code 39
no check digit control, variable length code; 1-99
characters
•
Code 128
disabled codes
EAN 128, Code 93, Codabar, pharmaceutical codes