Restore Default; Power Save - Datalogic DLL5100 Series Quick Reference

1 DEFAULT
UK
Read the restore default and optimize beeper codes.
I
Leggere il codice che ripristina i default e il codice
"optimze beeper".
F
Lecture du code de configuration par défaut et
lecture du code "optimize beeper".
D
Lesen Sie den Restore Default Code und den
Optimize beeper Code, um die Werkseinstellung
wieder herzustellen.
RS232 DEFAULT SETTINGS
9600 baud, no parity, 8 data bits, 1 stop bit, no
handshaking, ack/nack disabled, fifo enabled,
disabled, rx timeout 5 sec., serial trigger lock disabled;
DATA FORMAT
terminator = CR-LF
WEDGE DEFAULT SETTINGS
USA keyboard, caps lock off, delays disabled control
character emulation = ctrl+shift+key;
DATA FORMAT
terminator = ENTER
PEN DEFAULT SETTINGS
interpret mode, conversion to code 39 disabled, output level
normal, idle level normal, minimum output pulse 600 µs,
overflow medium

POWER SAVE

Laser driver=off before beep

RESTORE DEFAULT

optimize beeper
: code identifier
: code identifier
disabled, no
disabled, no
delay
header,
header,