X-Agora Interface; Parts Of The Interface - Barco XPR-600 User Manual

Barco Media Server XPR-Series User Guide
4.7

X-Agora interface

Figure 4.7, X-Agora start screen" shows the X-Agora start screen. From this screen, you
can open a new project or an existing project by clicking either New Project
name of an existing project, for example xagoraShape.
Figure 4.7. X-Agora start screen
4.7.1

Parts of the interface

X-Agora opens the project, defaulting to the workflow layout that was in use the last
time the project was open. In the case of a new project, X-Agora opens the Study layout.
Figure 4.8, X-Agora Programming workflow layout" shows an existing project open in the
Programming workflow layout.
72
Note
The Windows service xagoraServer MUST be running for X-Agora to launch.
It is enabled by default and launched automatically at Windows boot time.
Also make sure that you have the proper license for running the software.
Section 4: Software
or the
Barco Pn: 60600325