Apply Output Config - Barco XPR-600 User Manual

Section 5: Workflow layouts
Identify Monitors:
Identify Player:
Mode:

Apply Output Config:

Reset Output Config:
Make Master Player:
Always running:
Options menu
Advanced Player options for rendering are available in the Options menu of the Prop-
erties pane.
Barco Pn: 60600325
Barco Media Server XPR-Series User Guide
Licensing restricts the number of physical live inputs that
should be on a computer. See Player Types and Licenses in
Players Map (p.105), and see Licensing (p.36) for more in-
formation on licensing.
Display an overlay on each monitor of this computer,
showing the X-Agora output index of that monitor.
Note
Monitors that are not connected to the op-
timal GPU are not identified and cannot be
used to display Player windows.
a toggle to make the red LEDs on the front panel of a
Player blink, so that the machine can physically be identi-
fied.
Note
This feature is available only on XPR-Series
machines.
Choose between automatic and advanced modes.
(automatic mode) force the automatic configuration to be
applied.
(automatic mode) force the automatic configuration to be
reset.
Make this machine the Master Player, to which all other
Players will connect. The media, logic, and 3D objects of
the project will be synced to this Player.
Check this box to ensure that the Player is launched imme-
diately upon connecting to the Master Player, and also
any time it is closed. Use this feature in production so that
your show is launched automatically when you turn on
the computers on site.
113