Appendix E: Input check
The Barco Media Server has two applications that allow you to check whether or not
the video capture card is receiving input. The dREC application checks the SDI input
on the video capture card in the Barco Media Server XPR-604, and the Vision window
application checks the DVI input on the video capture card in the Barco Media Server
XPR-602.
E.1
DVI video input check
Use the Vision window application check the DVI input on the Datapath video-capture
card in the Barco Media Server XPR-602.
1.
Click the Windows icon
to access the Windows Apps screen.
2.
Select the Vision window icon
3.
Select the input (1 or 2) that you want to check from the Input drop-
down list.
4.
Click OK.
The Vision Window checks the selected input. If the input is present, Vision Window
shows the input. (See Figure E.1, Vision Window output".) If no input is detected, Vision
Window displays the message, "No input."
Barco Pn: 60600325
Barco Media Server XPR-Series User Guide
at the lower left-hand corner of the screen
to open the New Vision Window.
249