Barco Media Server Validation Screen - Barco XPR-600 User Manual

Section 2: Installation
The Barco USB Recovery drive is a USB 3.0 device; you may reduce
recovery time by using this drive in a USB 3.0 port.
2.
Right-click the Windows icon
screen to restart.
As the system restarts, it displays the Barco logo screen.
3. Press and hold the F8 key to summon the Select Boot Device screen.
4. Select the USB Recovery drive (STT ST3U16SSPS (15000MB)).
Use the up and down arrow keys on your keyboard, or use your mouse
to make selections.
After the system restarts, the Restore application displays the Barco
Media Server Validation screen.
Figure 2.12. Barco Media Server Validation screen
5. Allow the System Restore menu to load.
Barco Pn: 60600325
Caution
!
Ensure that only the USB Recovery drive is inserted in the
system and all other removable devices have been re-
moved. Data loss may occur on removable devices, if they
have not been removed from the system prior to performing
a System Restore.
Barco Media Server XPR-Series User Guide
at the lower left-hand corner of the
43