Sdi Video Input Check - Barco XPR-600 User Manual

Barco Media Server XPR-Series User Guide
Figure E.1. Vision Window output
E.2

SDI video input check

Use the dREC application check the SDI input on the DeltaCast video-capture card in
the Barco Media Server XPR-604.
1.
Click the Windows icon
to access the Windows Apps screen.
2.
Select the dREC icon
3. dREC displays the Record module.
250
at the lower left-hand corner of the screen
to open dREC.
• The Device Control panel displays the video capture
card parameters.
• The Card field identifies the card.
• The Channel field allows you to select
the video input channel (RX0 – RX3).
• The Video Preview panel shows the input, if there is
any.
Appendix E: Input check
Barco Pn: 60600325