Precautions - Barco XPR-600 User Manual

Barco Media Server XPR-Series User Guide
Figure 1.1, Korean Class A EMC Registration" shows the Class A EMC registration for
the Republic of Korea.
Figure 1.1. Korean Class A EMC Registration
!
FCC compliance statement
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in
a commercial environment. This equipment generates, uses, and can radiate radio fre-
quency energy and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the user will
be required to correct the interference at his or her own expense.
1.3.3

Precautions

• Before operating the units, please read this manual thoroughly and retain
it for future reference!
• Observe all warnings and instructions printed on the devices!
• Barco Media Servers do not require any maintenance work or servicing.
Servicing should never be carried out by unauthorized personnel!
• Never open the case of the unit without first disconnecting the power
supply cord!
• To prevent fire or electrical shock hazard, do not expose this unit to rain
or moisture!
20
Caution
This is a class A product. In a domestic environment this product may cause
radio interference in which case the user may be required to take adequate
measures.
Warning
For your own protection, observe the following safety precautions when in-
stalling and operating your device.
Section 1: Introduction
Barco Pn: 60600325