Gdm Select Component Window - Crown AMB-5 User Manual

IQ–MSD Turbo 1.4 Advanced IQ System Software
Fig. 4.2 GDM Select Component Window
Component List: Choose the IQ component from this list whose GDM you want to place on the graphics
plate. All IQ components that appear in the control blocks and all IQ2 components whose UCODE (OIF file) is
visible to Turbo will appear in this list.
Include Legend: Some GDMs have an optional legend to label its various controls and indicators. If this
check box is enabled, you can use it to control whether or not the legend will be included with the GDM.
Tip: If you plan to place more than one copy of the same GDM side-by-side on a graphics plate, you can include
the legend for the first GDM only. It will serve the other GDMs.
OK: Press this button to accept the settings. Afterward the pointer will change to a question mark with an outline
of the GDM as shown in Figure 3.11. Click ({) on an unused portion of the graphics plate or an unused portion
of a container to place the new object.
There are many different GDMs so we won't try to show them here. Each one is discussed in the sections later
in this manual which concentrate on specific IQ components.
Cancel: Press this button to cancel the request to create a GDM and close the GDM Select Components
window.
Note: Many GDMs provide real-time display of input or output audio signal levels. As a result, each one requires
processing time from the host computer. As more GDMs are placed on the graphics plate, the response time of
the monitor functions may slow.
Right click ({) on a GDM to open its Attributes window in case any attributes need to be changed.
Page 72