Adding A Command Assignment To A Simplex Aux Input - Crown AMB-5 User Manual

Fig. 8.6 Adding a Command Assignment to a Simplex AUX Input
To make a command assignment, begin at the top with the input number. Each parameter is described next. Use
T to select them.
Input #: The drone AUX input number.
Use Analog As AUX: Tells the drone to use an analog input in place of an AUX input. (Analog inputs can
be used as AUX inputs, making it possible to have as many as 32 "AUX" inputs.) If an analog input is used, it
will be numbered after the AUX inputs. In the example above, analog Input #1 would be listed as AUX Input
#17.
Components: The Components list is used to select the IQ component that will be controlled by the drone
input. All a component needs to be included in the list is a control block—it does not have to be on-line to appear
in the list. By including off-line components it is possible to preconfigure a drone before it is connected to an actual
IQ System.
Available Functions: The Available Functions list is used to select the command that will be sent to the
selected IQ component when the drone input is turned on or off. (See the Momentary and Inverted parameters
also.)
Note: It is possible to assign more than one command to the same drone input. In this way, the flip of a single
switch can send a number of different commands to one or more IQ components. Important: Com-
mands are executed in the order that they are added to an input. Carefully plan the order
that you want the commands to be executed before adding them to an input or else you may have to delete
and reenter them later.
The following commands are available for each IQ component:
Amplifier IQ P.I.P. without SmartAmp features:
DSPI—force Data Signal Presence Indicator to stay on
AUX Out—turn on/off AUX port output
Power—turn on/off the high voltage supply of each channel
Polarity—invert/restore the audio signal polarity of each channel
Mute—mute the audio signal by setting the input attenuator to –50 dB
Page 176
IQ–MSD Turbo 1.4 Advanced IQ System Software