Crown IQ System AMB-5 Installation Instructions
Backup retro module
Hide thumbs
Also See for IQ System AMB-5:
- User manual (222 pages) ,
- Service manual (52 pages) ,
- Operation manual (40 pages)
Advertisement
Quick Links
The Professional Audio Division of Crown International, Inc.
AMB-5 Backup Retro Module
Installation Instructions
T T T T T radmark Notice:
radmark Notice:
radmark Notice:
radmark Notice:
radmark Notice:
TM
TM
AMB-5
, SMX-6
®
®
Crown
, Amcron
International, Inc. Other trademarks are the property of their respective owners.
Printed on
recycled paper.
IQ System
© 1997 by CROWN INTERNATIONAL, INC.,
Mailing Address:
P.O. Box 1000
Elkhart, IN 46515-1000
TM
, MPX-6
, Distributed Intelligence
®
, IQ System
, PCC
Service Department:
Plant 2 SW
1718 W. Mishawaka Rd.
Elkhart, Indiana 46517
TM
®
®
and PZM
are registered trademarks of Crown
TM
, and Algo
are trademarks and
125502-1
12/97
Advertisement
Related Manuals for Crown IQ System AMB-5
Summary of Contents for Crown IQ System AMB-5
-
Page 1: Installation Instructions
The Professional Audio Division of Crown International, Inc. AMB-5 Backup Retro Module Installation Instructions © 1997 by CROWN INTERNATIONAL, INC., Mailing Address: P.O. Box 1000 Elkhart, IN 46515-1000 T T T T T radmark Notice: radmark Notice: radmark Notice: radmark Notice:... -
Page 2: Installation Procedure
General The purpose of this modification is to enhance the IQ AMB-5 Mixer with updated circuitry and firmware to eliminate possible program memory loss due to an AC power brownout. At the operator level there are no changes in mixer operation associated with this firmware upgrade. - Page 3 5. Remove battery B1 by cutting the retaining strap (if present) and the two leads. Trim leads near to the circuit board. 6. Remove the retro module from the static bag. Use static precautions when handling the module. 7. Install the retro module in the U96 socket; make sure the module is orientated so pin 1 of the 40-pin IC matches pin 1 of the socket.
-
Page 4: Technical Support
Remove AC power from the mixer for at least 30 seconds, then restore power to the mixer. 12.5 Perform a Roll Call or Upload to ensure that all settings are properly saved in the unit. Technical Support Call Crown Technical Support at (219) 294-8200 or (800) 342-6939 or Fax (219) 294-8301.