Grouping Multiple Objects; Moving A Group Of Objects - Crown AMB-5 User Manual

IQ–MSD Turbo 1.4 Advanced IQ System Software
the mouse button causes a box to appear around the group. In the example shown in Figure 3.16, the legend
panel and left two amplifier GDMs are grouped.
Fig. 3.16 Grouping Multiple Objects
Note: Begin the lasso on an empty part of the graphics plate to the upper left of the group.
To move a group, move the pointer to the top middle of the group until it turns into a cross-hair. Then, drag the
group to the new location (Figure 3.17). Upon releasing the mouse button, the objects will be ungrouped. If all
objects are not the same height, move the cross-hair to the tallest one, click and drag ({).
Fig. 3.17 Moving a Group of Objects
Note: Moving is the only operation that can be performed on grouped objects.
Page 57