Troubleshooting - Lang ECCO-PP Installation Operation & Maintenance

Electric full size convection oven
Hide thumbs Also See for ECCO-PP:
Table of Contents

Advertisement

Symptoms
What follows is a chart of Symptoms and Possible Causes to aid in diagnosing
faults with the oven.
Refer to the Symptoms column to locate the type of failure then to the Possible
Cause for the items to be checked.
To test for a possible causes refer to the TEST section and locate the Possible
Cause then refer to test to identify test procedures.
SYMPTOM
No Display
Oven will not heat
Oven motor will not run
Product burning
Product under done
POSSIBLE CAUSE
No power to cord outlet
Oven unplugged from outlet
Failed power cord or plug
Failed power switch
Contrast needs to be adjusted
Failed display board
Power Switch is not "ON"
Product has not been selected
Failed Transformer
Failed Probe
Failed Circuit board
Failed Contactor
Failed Over-temperature Thermostat
Failed Element
Power Switch is not "ON"
Product has not been selected
Failed Transformer
Failed Contactor
Failed Motor
Failed output on circuit board
Product is cooked too long
Failed Probe
Failed Circuit board
Product is not cooking long enough
Failed Probe
Failed Circuit board
17

TROUBLESHOOTING

Advertisement

Table of Contents
loading

Table of Contents