Advertisement
3. Hardware Installation
Note:
The maximum amount of power available is 30 Watts per port and 240
Watts total. If a power overload has occurred, the switch will prioritize
the distribution of power by port (from lowest to highest). That is, port
1 will receive the highest priority and port 8 will receive the lowest
priority. The ports with lower priority will have its PoE function disabled
until more than 7.5 watts of power becomes available.
The TI-PG1284i can be placed on a desktop, wall, or mounted to a
DIN-Rail.
DIN-rail Mounting Instructions
1. Attach the DIN-Rail mount to TI-PG1284i.
2. Position the unit in front of the DIN-Rail and hook the mount bracket
over the top of the rail.
2
Advertisement
