Ubiquiti AG-HP-5G27 Quick Start Manual page 4

LEDs
Signal
signal strength threshold values for each LED on
the Advanced tab under Signal LED Thresholds. The
default values are shown below:
Ethernet
when an active Ethernet connection is made and
flash when there is activity.
Power
device is connected to a power source.
In airOS®, you can modify the wireless
LED will light green when the wireless signal
strength is above ‑65 dBm.
LED will light green when the wireless signal
strength is above ‑73 dBm.
LED will light amber when the wireless signal
strength is above ‑80 dBm.
LED will light red when the wireless signal
strength is above ‑94 dBm.
The Ethernet LED will light steady green
The Power LED will light green when the