Auto Flip Setting - Sanyo VCC-9400 Instruction Manual

AUTO FLIP SETTING

When the on-screen image is inverted because tilting operations point the lens nearly straight down, AUTO FLIP will automatically rotate the
image up or down, left or right, within a 0 to 180 degree range so that the surveillance view can be seen in an upright position.
1
In the MAIN MENU, select ON for AUTO FLIP.
Use the joystick lever (d or c) to change OFF to ON.
Note: The screen image will be flipped 180 degrees when a tilt
operation exceeds the straight down position. The timing for
this flip will be at the end of the tilt operation or at the tilt limit.
2
Use the joystick lever (j or l) to move the cursor to
END, then press the ENTER button.
To return to the normal screen.
MAIN MENU
LANGUAGE SET ‚
PRESET POSITION SET ‚
CAMERA SET ‚
AUTO MODE SEQ ‚
AUTO FLIP ON
ALARM OFF
FREEZE OFF
REFRESH OFF
STARTING POINT OFF
MENU END
– 44 –
English