Sanyo VCC-9400 Instruction Manual page 18

CAMERA SETTINGS
PASSWORD setting
You can lock the privacy masks in place after they have been set.
The password requirement is initially set to OFF, but to begin using
it, you must enter the factory set password "1234".
1
Use the joystick lever (j or l) to move the cursor to OFF
for PASSWORD LOCK in the PRIVACY MASK SETTING
screen. Then press the ENTER button.
The PASSWORD screen will appear.
ENTER
Enter the factory set password "1234".
2
Use the joystick lever (j or l) to select "1", then use the
joystick lever (c).
To move the cursor to the next "*" digit.
1¤¤¤
3
Use the same steps to enter "2," "3," and "4," then press
the ENTER button.
"OK" will appear and BACK for MENU will be blinking. Press
the ENTER button again. The PRIVACY MASK SETTING
screen will reappear and "ON" will be blinking for PASSWORD
LOCK.
PASSWORD
1234 SET ‚
-
OK
MENU BACK
Note: If a different password is required, "NG" will appear. Please
carefully maintain the password so that it will not be
forgotten.
PASSWORD cancellation
For use when PASSWORD LOCK is ON
1
Press the ENTER button.
The PASSWORD screen will appear.
ENTER
English
PRIVACY MASK SETTING
PASSWORD LOCK OFF ‚
PASSWORD CHANGE SET ‚
MASK SET SET ‚
PASSWORD
MENU BACK
**** SET ‚
-
MENU BACK
PRIVACY MASK SETTING
PASSWORD LOCK ON ‚
PASSWORD CHANGE SET ‚
MASK SET SET ‚
MENU BACK
PASSWORD
**** SET ‚
-
– 17 –
Enter the factory set password "1234".
2
Use the joystick lever (j or l) to select "1", then use the
joystick lever (c).
To move the cursor to the next "*" digit.
3
Use the same steps to enter "2," "3," and "4," then press
the ENTER button.
"OK" will appear and BACK for MENU will be blinking. Press
the ENTER button again. The PRIVACY MASK SETTING
screen will reappear and "ON" will be blinking for PASSWORD
LOCK.
PASSWORD
1234 SET ‚
-
OK
PASSWORD changes
You can change the password with PASSWORD LOCK in either
the ON or OFF setting.
1
Use the joystick lever (j or l) to move the cursor to SET
for PASSWORD CHANGE and press the ENTER button.
The PASSWORD (NOW PASSWORD) screen will appear.
ENTER
2
Use the joystick lever (d or c, j) to enter the current
password (Ex: 1234), then press the ENTER button.
The PASSWORD (NEW PASSWORD) screen will appear.
PASSWORD
(NOW PASSWORD)
1234 SET ‚
-
3
Use the joystick lever (d or c, j) to enter a new
password (Ex: 4321), then press the ENTER button.
"OK" will appear and BACK for MENU will be blinking. Press
the ENTER button again.
The PRIVACY MASK SETTING screen will reappear.
PRIVACY MASK SETTING
PASSWORD LOCK OFF ‚
PASSWORD CHANGE SET ‚
MASK SET SET ‚
PRIVACY MASK SETTING
PASSWORD LOCK ON ‚
PASSWORD CHANGE SET ‚
MASK SET SET ‚
PASSWORD
(NOW PASSWORD)
**** SET ‚
-
PASSWORD
(NEW PASSWORD)
**** SET ‚
-