Sanyo VCC-9400 Instruction Manual page 25

CAMERA SETTINGS
10
Canceling a settings screen
• • • •
Use the joystick lever (l) to select BACK for MENU,
then press the ENTER button. The LENS screen will
reappear.
• • • •
To return to the normal screen, use the joystick lever (l
c) to select END for MENU, then press the ENTER
button.
• • • •
COLOR mode setting
1
In the MAIN MENU, select SET for CAMERA and press the
ENTER button.
The CAMERA SETTING screen will appear.
2
Use the joystick lever (j or l) to select SET for LENS,
then press the ENTER button.
The LENS screen will appear.
ENTER
3
Use the joystick lever (j or l) to move the cursor to
DAY/NIGHT, use the joystick lever (d or c) to select the
level setting (example: COLOR) and then press the
ENTER button.
The D/N SETTING - COLOR screen will appear, and the
"±0dB" setting for "AGC MAX GAIN" will be blinking.
1
Sets the maximum AGC gain.
2
Sets the digital noise reduction.
CAMERA SETTING
SYNC INT
PRIVACY MASK SET ‚
LENS SET ‚
VIEW SETTING 1 ‚
LENS
PRESET OFF
MENU END
FOCUS MANU ‚
ZOOM SET ‚
DAY/NIGHT AUTO ‚
VIEW ANGLE OFF
PRESET OFF
MENU BACK
D/N SETTING - COLOR
1
AGC MAX GAIN ±0·
2
DNR OFF
PRESET OFF
MENU BACK
AGC MAX GAIN setting
4
Use the joystick lever (j or l) to move the cursor to
AGC MAX GAIN, and then use the joystick lever (d or c)
to select the gain.
Available settings: Select the maximum AGC gain from
Note:
• • • •
If "OFF" is selected, no maximum gain will be set.
• • • •
If "OFF" is selected, the SENSE UP function will be forcibly set
to "OFF". However, the setting display will not change.
DNR setting
5
Use the joystick lever (j or l) to move the cursor to
DNR, and then use the joystick lever (d or c) to select
the digital noise reduction setting (example: ON).
Available settings:
• • • •
ON: DNR (digital noise reduction) is applied. This reduces
interference at low luminance levels.
• • • •
OFF: DNR is not applied.
Note:
• • • •
Digital noise reduction operates when the gain control
increases. In addition, blurring and ghosting of images can
occur when moving images are being monitored, and so the
resolution is also reduced slightly.
• • • •
If AGC MAX GAIN is set to "OFF", DNR will be forcibly set to
"OFF".
6
Canceling a settings screen
• • • •
Use the joystick lever (l) to select BACK for MENU, then
press the ENTER button. The LENS screen will reappear.
• • • •
To return to the normal screen, use the joystick lever (l
c) to select END for MENU, then press the ENTER button.
– 24 –
D/N SETTING - COLOR
AGC MAX GAIN ±0·
DNR OFF
OFF, –6dB, ±0dB, +6dB or +9dB.
D/N SETTING - COLOR
AGC MAX GAIN ±0·
DNR ON
English