Sanyo VCC-9400 Instruction Manual page 32

CAMERA SETTINGS
Manual iris setting
Sets electronic iris ON/OFF, lens aperture and iris level.
1
In the MAIN MENU, select SET for CAMERA and press the
ENTER button.
The CAMERA SETTING screen will appear.
2
Use the joystick lever (j or l) to move the cursor to
VIEW SETTING, then press the ENTER button. (Ex: 1)
The VIEW SETTING 1 screen will appear.
ENTER
3
Use the joystick lever (d or c) to select MANU, then
press the ENTER button.
The IRIS SETTING screen will appear.
ENTER
Electronic IRIS setting
4
Use the joystick lever (d or c) to select El. (Ex: ON)
ENTER
Note: When SENSE UP is on for IRIS SETTING, the electronic
shutter cannot be forcibly moved.
English
CAMERA SETTING
SYNC INT
PRIVACY MASK SET ‚
LENS SET ‚
VIEW SETTING 1 ‚
VIEW SETTING 1
IRIS MANU ‚
WHITE BALANCE ATW ‚
SHUTTER OFF
MOTION OFF
APERTURE ON ‚
GAMMA ON
PRESET OFF
MENU BACK
IRIS SETTING
EI ON
(IRIS STOP)
17
(LEVEL)
40
PRESET OFF
MENU BACK
–
Lens aperture setting
5
Use the joystick lever (j or l) to move the cursor to IRIS
STOP, then use the joystick lever (d or c) to select the
value.
ENTER
Available settings: 1 – 17 (Aperture opening)
Note:
• • • •
The smaller the value the more the aperture closes and the
image darkens.
• • • •
Changes to the value directly control the aperture of the lens.
6
Use the joystick lever (j or l) to move the cursor to
LEVEL, then use the joystick lever (d or c) to select the
value.
ENTER
Available settings: 0 – 100 (Level of opening)
Note:
• • • •
The smaller the value the more the video level drops, becoming
darker.
• • • •
The LEVEL setting controls both AGC circuit gain and shutter
speed, changing the amount of exposure.
7
Canceling a settings screen
• • • •
Use the joystick lever (l) to select BACK for MENU, then
press the ENTER button. The VIEW SETTING screen will
reappear.
• • • •
To return to the normal screen, use the joystick lever (l
c) to select END for MENU, then press the ENTER button.
Note:
• • • •
If the iris views an unusually bright image, it can cause a smear
that cannot be corrected by adjusting the light entering through
the lens. In this case, arrange the physical angle of lighting in a
way that will prevent on-screen smearing.
• • • •
If flickering of the target object occurs because of florescent
lighting in the camera location, changing to incandescent
lighting will prevent the flickering.
31 –
IRIS SETTING
EI ON
(IRIS STOP)
17
(LEVEL)
40
PRESET OFF
MENU BACK
IRIS SETTING
EI ON
(IRIS STOP)
17
(LEVEL)
40
PRESET OFF
MENU BACK