C Electronic Shutter Setting - Sanyo VCC-9400 Instruction Manual

Hide thumbs Also See for VCC-9400:
Table of Contents

Advertisement

CAMERA SETTINGS
Electronic SHUTTER setting
C
Sets the electronic shutter to either the fast shutter speed mode
(SHORT) or the slow shutter speed mode (LONG).
Fast shutter speed (SHORT) mode setting
1
In the MAIN MENU, select SET for CAMERA and press the
ENTER button.
The CAMERA SETTING screen will appear.
2
Use the joystick lever (j or l) to move the cursor to
VIEW SETTING, then press the ENTER button. (Ex: 1)
The VIEW SETTING 1 screen will appear.
ENTER
3
Use the joystick lever (j or l) to move the cursor to
SHUTTER, then use the joystick lever (d or c) to select
the speed mode for the electronic shutter. (Ex: SHORT)
Then press the ENTER button.
The ES SETTING screen will appear and 60 (1/60 sec) will be
blinking. This setting is suitable for fast moving target objects.
ENTER
4
Use the joystick lever (d or c) to select a electronic
shutter speed.
Available settings: 60, 100, 250, 500, 1000, 2000, 4000,
10000
Note: SHORT mode cannot be set if SENSE UP or IRIS is "ON".
English
CAMERA SETTING
SYNC
INT
PRIVACY MASK
SET
LENS
SET
VIEW SETTING
1
PRESET
OFF
MENU
END
VIEW SETTING 1
IRIS
AUTO ‚
WHITE BALANCE
ATW
SHUTTER
SHORT‚
MOTION
OFF
APERTURE
ON
GAMMA
ON
ES SETTING
SHUTTER SPEED
60
Slow shutter speed (LONG) mode setting
1
Use the joystick lever (j or l) to move the cursor to
SHUTTER, then use the joystick lever (d or c) to select
the speed mode for the electronic shutter. (Ex: LONG)
Then press the ENTER button.
The ES SETTING screen will appear and x1 (1/60 sec) will be
blinking. This setting is suitable for dark target objects.
ENTER
Note: When a shutter speed is set, it can also be adjusted with the
"ELS" button on the system controller.
2
Use the joystick lever (d or c) to select a electronic
shutter speed.
Available settings: x1, x2, x4, x8, x16, x32 (Field times
3
Canceling a settings screen
• • • •
Use the joystick lever (l) to select BACK for MENU, then
press the ENTER button. The VIEW SETTING screen will
reappear.
• • • •
To return to the normal screen, use the joystick lever (l
c) to select END for MENU, then press the ENTER button.
Note:
SHUTTER (LONG) cannot be set if any of the following settings is
active.
• • • •
MOTION: ON
• • • •
IRIS: AUTO item SENSE UP (ON) or MANU item El (ON)
35 –
VIEW SETTING 1
IRIS
AUTO ‚
WHITE BALANCE
ATW
SHUTTER
LONG ‚
MOTION
OFF
APERTURE
ON
GAMMA
OFF
ES SETTING
SHUTTER SPEED
PRESET
MENU
shown as multiples.)
x1
OFF
BACK

Advertisement

Table of Contents
loading

Table of Contents