Menu Item Flow And Menu Operation; Menu Item Flow - Sanyo VCC-9400 Instruction Manual

MENU ITEM FLOW AND MENU OPERATION

These menu items allow setting of autopan and sequential pan and other camera functions.
If these settings are not made, autopan and sequential pan cannot be utilized, so be sure to make settings appropriate to desired operations.

Menu item flow

MAIN MENU
LANGUAGE SET ‚
PRESET POSITION SET ‚
CAMERA SET ‚
AUTO MODE SEQ ‚
AUTO FLIP OFF
ALARM OFF
FREEZE OFF
REFRESH OFF
STARTING POINT OFF
MENU END
1
LANGUAGE
LANGUAGE ENGLISH
LANGUE FRENCH
IDIOMA SPANISH
MENU BACK
2
PRESET SETTING
PRESET NO. 2 ‚
DELETE SET ‚
TITLE OFF
CAMERA VIEW 1
PAUSE TIME 5S
MENU BACK
3
CAMERA SETTING
SYNC INT
PRIVACY MASK SET ‚
LENS SET ‚
VIEW SETTING 1 ‚
PRESET OFF
MENU BACK
4
SEQUENCE
ORDER STEP
PAUSE TIME 5S
[SEQ SPEED]
15
MENU BACK
AUTO FLIP setting (See p44)
5
Enables automatic top/bottom or left/right inversion of the image for camera tilts beyond the straight down position, which allows
upright viewing of the image throughout 180 degrees of camera tilt. (DIGITAL AUTOFLIP)
6
ALARM
ALARM IN 1 ‚
MOVE MODE OFF
ALARM OUT OFF
PRESET OFF
MENU BACK
FREEZE setting (See p48)
7
When using sequential pan this setting pauses the last image of a surveillance position before the camera shifts to a new position.
REFRESH setting (See p48)
8
Sets the cleaning of the camera's horizontal rotation contact points.
STARTING POINT (0 degrees) angle setting (See p49)
9
Sets the position to 0 degrees angle. Angle information can be received by RS-232C.
1 2 3 4 5
LANGUAGE setting (See p9)
Choose from among English, French and German.
PRESET POSITION settings (See p10)
• Enables sequential automatic display of screen views by storing 64 surveillance locations.
• Enables display of a TITLE for screens.
• Sets 9 "VIEW SETTING" items for the camera.
• Sets the "PAUSE TIME" for surveillance positions when on sequential pan.
CAMERA settings (See p14)
• Sets SYNC preference (power supply synchronization).
• Sets PRIVACY MASK for masking protection.
• Sets items related to the lens, such as zoom, focus and day/night settings.
• Sets 1 of 9 possible "VIEW SETTING" patterns for the camera.
AUTO MODE settings (See p40)
• Sets ordering method for sequential automatic display by numeric order or random selection. (Sequential pan)
• Selects image tracking memory (30 seconds or 60 seconds). (Tour mode)
• Sets Auto pan movements between start point and end point. (Auto pan mode)
ALARM settings (See p45)
(Alarm input: 8 related items)
• Sets alarm input.
• Sets polarity at time of alarm input.
• Sets move to preset position at time of alarm input.
• Sets alarm to work with motion sensors and external alarms.
• Sets alarm output to the communications line.
• Sets alarm duration time.
• Sets alarm output.
6 7 8 9
(Alarm output: 2 related items)
• Sets polarity for alarm external
• Sets duration time of external alarm
– 8 –
output.
output.
English