Table of Contents
Advertisement
Table 2. Config menu items (continued)
Menu item
Dislay
Submenu item
F1–F12 as primary function
Boot Display Device
Shared Display Priority
Total Graphics Memory
Boot Time Extension
Selection
• Disabled
• Enabled
• ThinkPad LCD
• DisplayPort
• HDMI
• Display on dock
• HDMI
• Display on dock
• 256MB
• 512MB
• Disabled
• 1 second
• 2 seconds
• 3 seconds
• 5 seconds
• 10 seconds
Chapter 6
Comments
Enable the F1-F12 function
or the special function
printed as an icon on each
key as the primary function.
Enabled: Executes the
F1-F12 function.
Disabled: Executes the
special function.
To temporarily switch the
above two options, press
Fn+Esc to enable FnLock.
The FnLock indicator is on
when FnLock is enabled.
Select the display device
that is to be activated at
boot time. This selection
is effective for boot time,
password prompt, and
ThinkPad Setup.
Select the priority between
shared display outputs.
HDMI and Dock displays
share a single display
output. This option chooses
which one is prioritized.
Allocate total memory
which Intel internal graphics
device shares.
If you select 512MB, the
maximum usable memory
might be reduced on the
32-bit operating system.
This option defines the
amount of time to extend
the boot process, in
seconds.
The system cannot detect
some external monitors
during boot because they
need a few seconds to be
ready. Try this option if the
monitor being used does
not display the boot screen.
.
Advanced configuration
69
Advertisement
Table of Contents
