Table of Contents
Advertisement
To replace a memory module, do the following:
1. Turn off the computer. Then disconnect the ac power adapter and all cables from the computer.
2. Close the computer display and turn it over.
3. Remove the battery. See "Replacing the battery" on page 118.
4. Remove the bottom cover. See "Replacing the bottom cover" on page 120.
5. Open the film and hold it when you are replacing the memory module.
6. Open the latches on both sides of the memory slot at the same time
1
. Then remove the memory
2
module
.
135
.
Chapter 10
Replacing devices
Advertisement
Table of Contents
