Table of Contents
Advertisement
7. Place the notched end of the new memory module toward the contact edge side of the memory slot.
Insert the memory module
downward until it snaps into place
cannot be moved easily. Then release the hand holding the film.
Attention: Do not touch the contact edge of the memory module. Otherwise the memory module
might get damaged.
8. Reinstall the bottom cover. See "Replacing the bottom cover" on page 120.
9. Reinstall the battery. See "Replacing the battery" on page 118.
10. Turn the computer over again. Connect the ac power adapter and all cables.
136
ThinkPad T460p User Guide
1
into the slot at an angle of about 20 degrees. Pivot the memory module
2
. Ensure that the memory module is firmly installed in the slot and
Advertisement
Table of Contents
