Attaching A Thinkpad Docking Station - Lenovo ThinkPad T460p User Manual

Hide thumbs Also See for ThinkPad T460p:
Table of Contents

Advertisement

10
Audio connector: Used to connect headphones or a headset that has a 3.5-mm (0.14-inch), 4-pole
plug to the audio connector to listen to the sound from the computer.
11
Security-lock slot: To protect your docking station from theft, you can use a security cable lock, such
as a Kensington-style cable lock, that fits this security-lock slot to lock your docking station to a desk,
table, or other non-permanent fixture.

Attaching a ThinkPad docking station

To attach your computer to a supported ThinkPad docking station, do the following:
Note: The ThinkPad Basic Dock does not have the system lock.
1. Disconnect all cables and devices from the computer.
2. Ensure that the system lock key is turned to the unlocked position (horizontal).
3. Align the top-left corner of the computer with the position mark of the docking station. Attach your
computer to the docking station vertically until you hear a click
the locked position
4. Check the docking status indicator. If the docking status indicator is not turned on, it indicates that your
computer is not correctly attached to the docking station. Check the ac power adapter of the docking
station, or disconnect and reattach the ac power adapter.
2
.
1
. Then turn the system lock key to
.
Chapter 3
Enhancing your computer
41

Advertisement

Table of Contents
loading

Table of Contents