Table of Contents
Advertisement
Can't connect to camera on a web browser using a DDNS address:
• Digimerge DDNS address entered incorrectly into the address bar. Make
sure to enter http://, the Domain Name you received in the confirmation
email, followed by colon, and the HTTP port number of the camera (e.g.
http://tomsmith.digimerge.net:80
• DDNS account not created. Go to
create a DDNS account, and then input the DDNS account information
into the camera DDNS page (Network Service>DDNS).
• DDNS information not configured on camera. See "6.11.1 DDNS" on
page 47.
• Port forwarding not set up. Make sure the HTTP port (default: 80) and
Control port (default: 30001) are forwarded on your router to the camera's
local IP address.
• Multiple cameras using same port number to connect. Configure each
camera to use different ports and port forward the new ports (see "6.7.2
Device Port" on page 30 for details on changing camera ports).
Can't connect to camera video on a web browser:
• If using IE, make sure to install ActiveX® plugins. You must install
ActiveX® plugins to view the camera video. For more information, see
"6.3 Internet Explorer® Setup" on page 21.
• If using a browser other than IE (e.g. Google Chrome, Apple Safari®,
Mozilla Firefox), make sure latest version of Adobe Flash Player is
installed. Visit
Adobe Flash Player.
Video performs poorly on browser:
• Insufficient bandwidth available for high-quality stream1. Select stream2
under Stream. Stream2 provides a lower-resolution to conserve
bandwidth and improve performance on low-bandwidth connections.
User account is locked:
• User accounts are locked when the password has been incorrectly
entered 3 times. To unlock the account, login to the camera web interface
as admin. Click Privilege Manager>User. Under User, select the locked
user account and click Unlock to unlock the account.
http://www.adobe.com/
).
http://www.ddns.digimerge.net
to download the latest version of
Troubleshooting
and
65
Advertisement
Table of Contents
