Table of Contents
Advertisement
• Password/Confirm Password: Enter the account password for the NAS.
• File System: Enter the NAS file system (cifs or nfs).
• Use All Space: Check to enable the camera to record until the NAS is full.
Uncheck to limit the amount of space the camera can record on and enter
the amount of space (in MB) available to the camera under Free Space.
5. Click OK.
6. Set up recording using the Record Policy sub-menu (see "6.9.1 Record
Directory" on page 39). To access your recordings, use Syncro-V or
manually access your NAS device.
NOTE: On the Record Directory page, Status will be OK when NAS is
selected if NAS is accessible and all settings have been entered correctly.
Web Configuration
Status OK
43
Advertisement
Table of Contents
