Camera Installation - Digimerge DNB14TL2 Instruction Manual

Camera Installation

3. CAMERA INSTALLATION
Make sure to follow the correct polarity if connecting
the camera to DC power. Polarity is marked on the
power connector.
1. Use the mounting plate or
template to drill holes for the
mounting screws and cables.
Align the mounting plate with
the TOP mark facing you. If
mounting the camera to a wall,
make sure that TOP mark is also
facing up. Attach the mounting
plate to the surface using the
mounting plate screws (4x).
NOTE: Use the included drywall
anchors if installing in drywall.
2. Make sure the hinge screw (1x)
is attached to the back of the
camera.
6
1
Mounting plate
Mounting screw holes
2
TOP
Hinge screw