6. Loosen the three allen screws on the camera stand to adjust the camera
viewing angle as necessary. Tighten the allen screws when finished.
• Screw A allows you to rotate the camera 360°, independent from the
camera stand.
• Screw B allows you to tilt the camera and camera stand 90°.
• Screw C allows you to rotate the camera and camera stand 360°.
7. Use a Philip's head screwdriver to adjust the camera zoom and focus as
needed.
7
8. Close the service compartment and firmly tighten the service
compartment screw.
6
Focus
Zoom
Camera Installation
C
A B
9