Table of Contents
Advertisement
Web Configuration
4. Configure the weekly schedule. The schedule is divided into 3 periods,
and motion detection will be enabled in all times during all 3 periods.
5. Click Motion Area, and configure up to 8 motion detection areas:
• Select Area Motion or Area Mask to configure motion detection areas.
• Area Motion allows you to select areas where motion detection is enabled.
• Area Mask enables the entire image for motion detection, and allows you
to select areas to disable motion detection.
• Right-click to delete the last created area.
6. Under Sensitivity, select the sensitivity for motion detection: Low,
Medium, or High.
7. Click OK to save your settings.
6.9 Local Record
Local Record contains the following sub-menus:
• Record Policy
• Record Directory
38
Advertisement
Table of Contents
