Disassembling The Upper Seat Assy From The Seat Base Assy - NAMCO ACE DRIVER DELUXE Installation And Commissioning Manual

3-2 Disassembling the Upper Seat Assy from the Seat Base Assy

WARNING: The weight of the upper seat assembly is approx. 120kg. Foot
position is poor and the assembly heavy, so at least five people
should be used for disassembly
WARNING: This work involves moving the seat assembly from left to right in
order to remove screws. Take care not to trap or injure the other
person when performing this work.
1) Remove the rear covers (L), (R).
Removing the Rear Cover (L)
1) Remove the rear guard fence.
2) Turn the steering wheel all the way to the right, and move the cabinet by
hand so that the rear cover (L) is easier to remove.
3) Remove the security screws (M5x20), and remove the edge guards and
rubber skirts.
4) Remove the nine security screws (M5x12) and two security screws (M8x20),
then remove the rear cover (L)
Removing the Rear Cover (R)
1) Turn the steering wheel
all the way to the left
and move the cabinet
to the left by hand so
that the rear cover (R)
is easier to remove.
2) Remove the rear cover
(R) in the same way as
the rear cover (L) as
above.
Page
25