Table of Contents
Advertisement
IMPORTANT
SAFEGUARDS
Always follow these safety precautions when
using this appliance.
Getting Ready
1.
Read all instructions.
2.
Blades and discs are sharp. Handle them
carefully.
3.
Always unplug from outlet when not in
use, before putting on or taking off parts,
before removing food and before
cleaning. To unplug, grasp plug and pull
from electrical outlet. Never pull cord.
4.
Do not use outdoors.
5.
Do not let cord hang over edge of table or
counter, or touch hot surfaces.
6.
Do not operate any appliance with a
damaged cord or plug, or after appliance
has been dropped or damaged in any way.
Return appliance to the nearest authorized
service facility for examination, repair or
electrical or mechanical adjustment.
Operation
1.
Keep hands as well as spatulas and other
utensils away from moving blades or discs
while processing food, to prevent the
possibility of severe personal injury or
damage to food processor. A plastic
scraper may be used, but only when the
food processor motor is stopped.
2.
Avoid contact with moving parts. Never
push food down by hand when slicing or
shredding. Always use pusher.
3.
Make sure motor has completely stopped
before removing cover. (If machine does
not stop within 4 seconds after you remove
the bowl cover assembly, call 1-800-472-
7606 for assistance. Do not use the
machine.)
4.
Never store any blade or disc on motor
shaft. To reduce the risk of injury, no blade
or disc should be placed on the shaft
except when the bowl is properly locked in
place and the processor is in use. Store
blades and discs, as you would sharp
knives, out of reach of children.
5.
Be sure cover and feed tube are securely
locked in place before operating food
processor.
6.
Never try to override or tamper with cover
interlock mechanism.
Cleaning
To protect against risk of electrical shock, do
not put base in water or other liquids.
General
1.
This appliance should not be used by or
near children or individuals with certain
disabilities.
2.
Do not operate this, or any other motor-
driven appliance, while under the influence
of alcohol or other substances that affect
your reaction time or perception.
3.
This food processor is UL listed for
household use. Use it only for food
preparation as described in the
accompanying recipe and instruction book.
Do not use this appliance outside of its
intended use.
4.
The use of attachments not recommended
or sold by Cuisinart may cause fire,
electrical shock or personal injury, or
damage to your food processor.
5.
To avoid possible malfunction of work bowl
switch, never store processor with pusher
assembly in locked position.
6.
Maximum rating of 350 watts is based on
attachment that draws greatest current.
Other recommended attachments may
draw significantly less current.
7.
Do not operate your appliance in an
appliance garage or under a wall cabinet.
When storing in an appliance garage
always unplug the unit from the
electrical outlet. Not doing so could create
a risk of fire, especially if the appliance
touches the walls of the garage or the door
touches the unit as it closes.
NOTICE: If your food processor has a plastic
case, it has a polarized plug (one blade is wider
than the other). As a safety feature, this plug will
fit in a polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse the plug. If
it still does not fit, contact a qualified electrician.
Do not attempt to defeat this safety feature.
SAVE THESE
INSTRUCTIONS
FOR HOUSEHOLD
USE ONLY
4
WARNING: RISK OF FIRE
OR ELECTRIC SHOCK
The lightning flash with arrowhead
symbol within an equilateral triangle
is intended to alert the user to the
presence of uninsulated dangerous
voltage within the product's enclosure
that may be of sufficient magnitude to
constitute a risk of fire or electric
shock to persons.
The exclamation point within an
equilateral triangle is intended to alert
the user to the presence of important
operating and maintenance (servicing)
instructions in the literature
accompanying the appliance.
SPECIAL CORD SET
INSTRUCTIONS
NOTICE
If you have a die-cast metal unit, for your
protection, it is equipped with a 3-conductor
cord set that has a molded 3-prong grounding-
type plug, and should be used in combination
with a properly connected grounding-type outlet
as shown in Figure A.
If a grounding-type outlet is not available, an
adapter, shown in Figure B, may be obtained so
that a 2-slot wall outlet can be used with a
3-prong plug. As shown in Figure C, the adapter
must be grounded by attaching its grounding
plug under the screw of the outlet cover plate.
NOTE: Do not remove the grounding prong.
CAUTION: Before using an adapter,
it must be determined that the outlet cover
plate screw is properly grounded. If in doubt,
consult a licensed electrician. Never use an
adapter unless you are sure it is properly
grounded.
Note: Use of an adapter is not
permitted in Canada.
CONTENTS
Important Unpacking Instructions ................ 3
Important Safeguards................................... 4
Features and Benefits .................................. 6
Assembly Instructions ...................................7
Machine Controls ......................................... 8
Machine Functions ....................................... 8
User Guide and Capacity Chart ............... 8-9
Cleaning, Storage and Maintenance .......... 10
For Your Safety ........................................... 10
Technical Data .............................................10
Troubleshooting .................................... 11-12
Warranty Information .................................. 59
WARNING
RISK OF FIRE OR ELECTRIC SHOCK
DO NOT OPEN
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REPAIR SHOULD BE DONE BY AUTHORIZED SERVICE PERSONNEL ONLY
5
Hide quick links:
Advertisement
Table of Contents
