Communicator Settings - Magellan MG-6130 Programming Manual

Communicator Settings

Section Data
____/____/____
[105]
____/____/____
[106]
____/____/____/____
[107]
____/____/____/____
[108]
____/____/____/____
[109]
[110]
[111]
___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___
[112]
___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___
[113]
_
__/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___
[114]
_
__/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___
[115]
___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___
[116]
_
__/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___
* Using Magellan's speakerphone feature (MG-6160 only), the Service telephone number allows the user to directly call the installer or maintenance staff if any problems arise.
† If you are using any report format other than SIA in sections [105] and [106] and you would like to transmit an "A", press [0] on the main keypad; if you would like to enter a
space (non-reportable digit), press the [1] key on the center keypad.
Keys to press
[*]
[#]
ACTION
Center [ ] (pause) key
There are five personal telephone numbers used for voice reporting. These telephone numbers are programmed through the
console's communicator menu.
10
Description
Report format for monitoring station telephone number 1 (
Report format for monitoring station telephone number 2 (
001 = Ademco slow (1400Hz 10BPS)
004 = Ademco Contact ID (default)
[4] [3]
Account number (
) †
Panel identifier (for use with WinLoad software) (
Panel password (for use with WinLoad software) (
Reserved for future use
Monitoring station telephone number 1 (32 digits maximum; if less than 32, press [ok] to accept)
Monitoring station telephone number 2 (32 digits maximum; if less than 32, press [ok] to accept)
Pager Telephone # (32 digits maximum; if less than 32, press [ok] to accept)
Numeric message sent with Pager Reporting (32 digits maximum; if less than 32, press [ok] to accept)
PC telephone number for WinLoad (32 digits maximum; if less than 32, press [ok] to accept)
Service telephone number* (32 digits maximum; if less than 32, press [ok] to accept)
Table 1: Special Keys for Telephone Numbers
Action or Value
*
#
Add a 4-second pause to the telephone number. Press the key and a "P" will be inserted into the telephone number
[4] [3]
( )
[4] [3]
)
[4] [3]
)
002 = Silent Knight (1400Hz 20BPS)
005 = SIA FSK
[4] [9]
)
[4] [9]
)
003 = SESCOA (2300Hz 20BPS)
006 = ADEMCO Express (DTMF 4+2)
[4] [3]
( )
[4] [3]
( )
[4] [3]
( )
[4]
(
[4] [3]
(MG-6160 only)
( )
Programming Guide
[3]
)