Receiving - Global Water G5CT Operation Manual

Receiving the Cooler
Unpacking
Global Water products are shipped completely assembled and ready to
operate. Remove the top of the box and slide the water cooler out and
save the box and packing materials.
Inspection
Inspect the cooler for shipping damage. Look at the exterior panels to
see if they have been dented or damaged. Check the dispensing spigots
in the front. Open the bottom panel to assure that the filter system is
intact. Look at the back of the cooler to see if the compressor is secure
and has not broken from the mounting. Inspect filter system to see that
nothing is damaged or dislodged from shipping.
Description Model G5CT
The G5CT Model provides water at 3 different temperatures, dispensed
from three spigots, "hot", "cold" and ambient. The assembly drawing is
shown in Figure 1. Water flows from the filter system into the ambient
tank and the cold water tank simultaneously. The cold tank then feeds
the hot tank which is heated by internal heaters. The level in the cold
water tank is controlled by a float valve mechanism which controls a 4
way auto-shut off valve on the water feed line to maintain a constant
level of filtered water. Both models are available with reverse osmosis
(RO) or standard filter (F) versions.
4 | P a g e